Vision-Based System Design Part 6 – Efficient Sensor Fusion in Sophisticated Embedded Vision Systems

Article Index

Giles Peckham, Regional Marketing Director at Xilinx
Adam Taylor CEng FIET, Embedded Systems Consultant.

This series of articles has considered several aspects of developing embedded vision systems, including sensor selection, interfacing, and development of the signal chain comprising vision-signal processing algorithms.

In a sophisticated embedded vision application, such as an automotive Advanced Driver Assistance System (ADAS), some functionality may be dependent on combining the results from two or more sensors. This is sensor fusion, and enables the system to acquire information that cannot be provided by one sensor alone.

In the context of vision-based systems, sensor fusion is usually done in real-time, to enable immediate decision making. The alternative is offline sensor fusion, where the sensor data is extracted, fused and decisions are made at a later point in time. Moreover, in an application such as ADAS, sensor fusion may involve combining several channels of data from sensors of the same type, or could demand fusion of data from different types of sensors. An object-detection and distance monitoring application provides a good example for comparison of these homogeneous and heterogeneous approaches to sensor fusion.

A system relying on a single forward-looking vision sensor could detect and identify objects, but at least one more vision sensor is needed to calculate distances to detected objects using a parallax algorithm.

Alternatively, combined object detection, recognition, and range-finding can be enabled by fusing vision-sensor data with RADAR or LIDAR. Other application examples involving fusion of differing images include X-Ray, MRI and CT for medical applications, or visible and infrared images in security systems.

Processing Demands
Crunching data from multiple vision sensors requires considerable processing power. If using colour image sensors, pre-fusion processing such as colour-filter interpolation, colour-space conversion, resampling and image correction are required. The sensor-fusion algorithm itself must be performed, and an ADAS system requires subsequent background subtraction, thresholding and contour detection to locate objects using the simplest approach, whereas some systems may use an even more processing-intensive HoG/SVM classifier. Moreover, demands for higher frame rate or larger image size further increase the computation required to pre-process the image and extract the information.

Of course, this is literally only half of the story: in a homogeneous system, the same image-processing pipeline needs to be implemented for the second sensor. Similarly, a heterogeneous system must configure, drive, receive and extract the information from the accompanying channel/s.

Benefit of All Programmable Architectures
Within embedded vision systems it is common to use All Programmable FPGAs or All Programmable SoCs to implement the image-processing pipeline. If these make sense for traditional embedded vision applications, then they really stand out for embedded vision fusion applications.
An Embedded Vision application typically uses a processor for supervision, control and communication. In an All Programmable SoC, this is a hard core with many supporting peripherals and interface standards. If an All Programmable FPGA is used, the processor can be a soft core with customized peripheral and interface support. Taking advantage of other features of these embedded processors, such as SPI or I2C interfaces, allows additional sensors such as accelerometers, magnetometers, gyroscopes and even GPS to be connected. This enables the software to quickly and easily obtain required information from a host of different sensor types, and provides for a scalable architecture.

While the image-processing pipeline required to extract information from the image sensor can be implemented easily in programmable logic fabric, this fabric can also implement pipeline for other heterogeneous sensors such as RADAR and LIDAR, or multiple pipeline instances in the case of a homogeneous system.

The tight coupling between the processor memory and programmable logic in All Programmable Zynq®-7000 or All Programmable Zynq® UltraScale+™ MPSoCs ensures the application software can easily access the resultant datasets for further processing and decision making. Because the separate sensor chains are implemented in logic they operate in parallel, which is beneficial when synchronisation is required, such as with stereoscopic vision. Moreover, implementation can be accelerated by using High Level Synthesis (HLS) to develop the algorithms directly for implementation within the programmable logic fabric.

T&M Supplement

The Annual T&M Supplement, sponsored by Teledyne LeCroy, was published in July. Click on the image above to read this exclusive report for free.

Follow us